Modh Ceangail an Nascóirí Tionscail

Modh ceangail tionscailcónascaire

Industrial cónascaires are also called cónascaires and plugs. Its function is to connect two active components and act as a current and signal transmission function. With the changes in the application environment, cónascaires tar éis modhanna éagsúla nasc a dhíorthú, is é an cuspóir oiriúnú níos fearr a dhéanamh do thimpeallacht an radhairc agus tarchur comhartha seasmhach a chinntiú.

1. Ceangal snáithithe

Is é seo an modh ceangail traidisiúnta, agus beidh sé úsáideach oibriú i roinnt comhpháirteanna meánmhéide níos mó nó i dtimpeallacht le tonnchrith láidir. Is é an buntáiste a bhaineann leis an gcineál seo ceangail ná go bhfuil sé iontaofa in úsáid, agus go bhfuil an cábla socraithe ag frithchuimilt an chnó agus an ghiar. Má chuireann tú fiús leis chun scaoilte a chosc, beidh an éifeacht níos fearr. Is é an míbhuntáiste ná go bhfuil luas an díchumhachta réasúnta mall, agus go dtógann sé beagán leictreachais an snáithe a tharraingt siar, rud a thógann go leor ama.

2. Ceangal Bayonet

Is foirm cheangail í seo atá in ann ceangal agus dícheangal go tapa. Is minic a úsáidtear é chun dhá chomhpháirt leictreacha shimplí a nascadh.Nascóiríthat are connected by a snap-in type will mark the correct snap-locking direction at the buckle. The user can observe whether the buckle is installed in the small hole on the side of the cónascaire nut.

3. Ceangal breiseán

The plug-in connection method is a commonly used connection method. The plug and socket of the cónascaire can be connected and separated by moving in the horizontal direction. No twisting and optional installation are required, and the connection can be completed in a short time. And separation. The common plug connection has two structures: ball and pin. This connection method saves the traditional mechanical locking mechanism, so once the cónascaire is inserted by mistake, it is very difficult to pull it out.

4. Ceangal comh-aireachta

Tá sé bunaithe ar an modh ceangail leictreach atá gar don fhráma agus ní mór é a cheangal go dall leis an trealamh. Trí úsáid a bhaint as an modh seo is féidir an trealamh leictreach a dhéanamh an-éadrom agus beag. Is féidir le gach aonad oibriú go neamhspleách ar a chéile, atá níos éasca a choimeád ar bun agus a bhfuil iontaofacht níos airde aige. Ós rud é nach féidir le hoibreoir an mhodha ceangail seo an nasc a bhrath, ní mór go mbeadh feiste suite cruinn ann chun cabhrú leis an nasc réidh. De ghnáth bain úsáid as teagmháil snámh nó dearadh earraigh chun a nasc ceart a chinntiú.

5. Ceangal sádrála

Soldering connection refers to the formation of continuous metal between the solder and the surface to be soldered. Therefore, the prerequisite for the cónascaire is to have solderability. The common plating on the soldering end of the cónascaire includes metals such as tin alloy, silver and gold. The reed type contact has the welding piece type, the punching welding piece type and the notched welding piece type for the common welding end: the pinhole contact has a drilling arc notch for the common welding end.

6. Pierce an nasc

Tugtar nasc díláithrithe inslithe ar nasc piercing freisin. Tá tréithe iontaofachta ard, costas íseal agus úsáid áisiúil aige. Tá sé in úsáid go forleathan icónascaires in the printing industry. It is suitable for interconnection between ribbon cables. It is not necessary to puncture the insulation layer of the cable when connecting. The tip of the "U"-shaped contact spring of the cónascaire is used to pierce the insulation layer, so that the conductor of the cable slides into the concave groove of the cónascaire and is fixed, so that the cable and The cónascairesi ndlúth-theagmháil.